OTHER FEATURES

GO-TO SEARCH

The Go-To Search feature enables the VCR to quickly locate a counter reading anywhere on the tape. When the VCR locates the counter reading, it will begin playback.

1.Press STOP.

2.Press SEARCH on the remote until the GO-TO SEARCH menu appears on the screen.

3.Press number buttons to enter the hour(s) and/or minutes of the counter reading you want the VCR to “go to”. Press CLEAR on the remote to correct an entry.

4.Press FWD to search forward or REV to search in reverse.

5.Press STOP to stop Go-To searching.

PRO-TECT PLUSLOCKING FEATURE

To disable the usage of the VCR, or to protect your timer recordings, you can lock the VCR so that the buttons on the VCR or remote won’t work.

To Lock: Press and hold either the remote’s POWER or OFF button. The front panel POWER indicator flashes when the feature is activated. POWER will also flash if you attempt to turn on the VCR while the feature is on.

To Unlock the feature and turn on the VCR: Press and hold either the remote’s POWER or VCR button.

GO-TO SEARCH

Current tape counter is 2:17:25

Press REV or FWD to go to 0:00:00

Press SEARCH to exit.

Locking Your VCR:

If a timer recording is programmed, make sure your VCR is turned off. Locking your VCR prevents the VCR from being accidentally turned on.

32

Page 34
Image 34
RCA VR525 manual GO-TO Search, PRO-TECT Plus Locking Feature, Locking Your VCR