Recording a Program
Recording Audio
You can record audio only from another audio source connected to the AUDIO1 IN (L and R) jacks on the back of the VCR.
To Record Audio Only (Refer to hookup on page 7.)
1.Press the INPUT button or 0,0 on the remote to hear the source attached to the AUDIO jacks. VIDEO appears on the TV screen.
The VCR records audio from the audio equipment connected to the AUDIO1 (L and R) IN jacks.
2. Use SPEED on the remote to select the recording speed. The tape speed indicator appears on the TV screen.
3. Start playing the audio source. Then, press RECORD on the VCR or REC on the remote to begin recording.
Dand 6 appear in the VCRÕs display panel.
4. Press STOP•EJECT on the VCR or STOP on the remote when you are finished.
To Play Back Audio Only
Connect the AUDIO OUT of the VCR to the appropriate input on your amplifier or receiver. Do not use the phono input. Refer to your amplifier or receiver userÕs guide for information.
Using the Recording Features
Recording Pause
To prevent recording short passages of unwanted material, use PAUSE on the remote or PLAY•PAUSE on the VCR during recording to stop and start recording.
Dand Pappear in the VCRÕs display panel.
The VCR automatically switches from pause to stop after a few minutes.
Pro-Tect Plus™ (Child Lock) Feature
This feature is useful to tamper proof your timer recordings from unwanted changes and/or protect the VCR from misoperation by other users in the household.
To Lock the VCR
Press and hold the POWER button on the remote for approximately six seconds to turn on the
The
TIMER and D appear in the VCRÕs display panel.
To Unlock the VCR
Press and hold POWER button on the remote for approximately six seconds to unlock the VCR. The VCR turns on.
28
