References
Location of Controls
Front Panel
Tape Compartment
POWER | TV•VCR | H |
VCR
REW PLAY•PAUSE FWD
STOP•EJECT RECORD
CHANNEL
TRACKING
Remote Sensor
CHANNEL or TRACKING up or down
Selects next higher or lower channel in the VCRÕs channel memory.
Adjusts tracking during playback.
FWD (Fast Forward)
Fast forwards the tape when the VCR is stopped.
Searches the picture forward during playback.
PLAY•PAUSE
Plays a tape.
Pauses the tape for
Pauses the tape during recording to prevent recording unwanted material.
POWER
Turns the VCR on or off.
RECORD
Start the VCR recording.
Used for express recording.
Remote Sensor
Receives signals from the remote control. Aim the remote at this sensor with no objects between them.
REW
Rewinds the tape when the VCR is stopped.
Searches the picture in reverse during playback.
STOP•EJECT
Stops the normal functions such as record, playback, rewind,
Press when the VCR is stopped to eject the cassette.
TV•VCR
Switches the picture signal so that it either comes from the VCR or the TV channel. See page 10.
Back Panel
R |
| IN FROM |
|
| |
AUDIO1 |
| ANT. |
L |
| VHF/UHF |
OUT | IN | OUT TO TV |
| ||
|
| 3 CH. 4 |
VIDEO1 |
|
|
3CH.4 Switch
Selects the channel to which you tune the TV to see the VCR picture if you connect the VCR using one of the basic hookups.
IN FROM ANT. (Antenna) Connector
Receives a signal from an antenna or cable system when attached.
OUT TO TV Connector
Passes signal to TV using the cable supplied.
VIDEO1 IN and AUDIO1 (R and L) IN Jacks
Receive signals from another component like a VCR or camcorder when it is connected to these jacks. Use INPUT (channel 00) on the remote to select.
VIDEO1 OUT and AUDIO1 (R and L) OUT Jacks
Send signals from VCR to another component like a VCR or camcorder when it is connected to these jacks.
30
