
References
Location of Controls
Back Panel
IN FROM |
|
|
|
|
|
ANT. |
|
| AUDIO1 | VIDEO1 | OUT |
|
|
| |||
VHF/UHF OUT |
|
|
|
| |
OUT TO TV |
| R | L |
| IN |
|
|
| |||
3 CH. 4 | IN |
|
|
| |
|
|
|
|
|
3 CH. 4 Switch
Selects the channel to which you will tune the TV to see the VCR picture if you connect the VCR using one of the basic hookups.
IN FROM ANT. (Antenna) Connector
Receives a signal from an antenna or cable system when attached.
OUT TO TV Connector
Passes signal to TV using the cable supplied.
Lets you attach another
Lets you attach the
Also, remember to attach the audio jacks. The
VIDEO1 and AUDIO1 (R and L) IN Jacks
Receives signals from another component, such as a VCR or camcorder, when it is connected to these jacks.
Display L1 in the VCR display panel using INPUT on the remote to select these jacks.
VIDEO1 and AUDIO1 (R and L) OUT Jacks
Sends signals from VCR to another component, such as a monitor TV or another VCR, when it is connected to these jacks.
If the other component is not stereo, you may need a
42