TROUBLE SHOOTING,

TROUBLE SHOOTING,

No Sound

Distortion

Ensure the AC adapter is fully inserted into the AC outlet and into the power connection input on the transmitter.

Ensure the headphones ON /OFF switch is in the ON position.

Headphone batteries may be too low. Charge batteries.

Ensure the TV or audio component is on and tuned to a channel with audio.

Adjust the volume control on the headphone to turn up the volume.

The connected audio/video equipment is not playing (CD, Tape, etc. .. ). Check the audio source.

The volume of headphone is turned down, adjust the volume to an appropriate level.

Ensure the stereo indicator light is on. If not, adjust the tuning control on the headphones until the indicator light is on.

Change the position of the FREQ. ADJUST control to change operating frequency. You must then adjust the tuning control on the headphone until the stereo indicator light is on.

Headphone batteries may be too low. Charge the batteries or replace with new ones if they do not charge.

Ensure the level control wheel is adjusted properly.

The headphone is too far from transmitter, move closer.

The input level of the audio Signal is too low. Turn up the volume of the audio source equipment.

8

Page 8
Image 8
RCA WHP150 manual Trouble Shooting, No Sound Distortion