RCA YS1052 owner manual YSS2, Level, Crossover, RCA Line Input Jacks, RCA Line Output Jacks

YSS2

PHASE

0°(Norm)

POWER OFF AUTO

180°	SUBWOOFER	CROSSOVER	INPUT OUTPUT
	LEVEL	FREQUENCY
ON

MIN	MAX 50 Hz 200
YSS2	ACTIVE STUDIO
	S U B W O O F E R
OUTPUT	INPUT

TO SPEAKER FROM AMPLIFIER

NOTE: Phase can be used to describe the relationship of superimposed audio waves. By super- posing audio waves using different phase shifts the audio waves can reinforce each other (0° shift

=in phase), cancel out each other (180° shift = out of phase), or partially cancel (neither totally in phase or out of phase). When two audio sources (such as two speakers) are in phase you will notice better bass response; if they are out-of-phase the audio bass response will be reduced.

3.Level

This control adjusts the subwoofers master output level. Turn clockwise to increase and counter-clockwise to decrease the level.

4. Crossover

The Crossover control adjusts the YSS2’s low-pass frequency filtering for the subwoof- er output. Available low-pass settings are 50 Hz, 80 Hz, 120 Hz and 200 Hz.

5. RCA Line Input Jacks

These RCA jacks provide a connection for external audio sources that provide line level signal.

6. RCA Line Output Jacks

The RCA jacks labeled Output are used to pass-through the audio signal from the Input to another amplifier.

7. Input / From Amplifier Terminals

These spring-loaded terminals on the YSS2 are used for direct connection from a power amplifier’s speaker output.

Note: The spring terminal inputs are typically used for connecting to a system that does not pro- vide line level or preamp outputs.

8. Output / To Speaker Terminals

These spring-loaded terminals are used to connect to the main system speakers.

Note: When using the Input / From Amplifier spring-loaded terminals as an input to the YSS2, the spring-loaded output terminals connect to the main system speakers.