POWER THE HEADPHONES
The AW770 headphones are powered by 3 AAA Nickel Cadmium
Insert the Batteries
Battery
Compartment
Cover (B)
LR
1.Make sure the headphone Power ON/OFF Button (E) is “OFF” or in the “out” position.
2.Remove Battery Compartment Cover (B) by pushing down and out at the same time on the notch at the top of the cover.
3.Insert batteries following polarity (“+” and
POWER |
STEREO
Power On/Off Button (E)
Charge Cable (S)
LR
| LU |
POWER | STEREO |
Charge Input
Jack (D)
DC 12V
CHARGE |
| FREQ. |
LEVEL | ADJUST |
Charge Output
Jack (J)
Charging Ni-Cd Batteries
1.Make sure headphone Power ON/OFF Button (E) is “OFF”. Connect one end of Charge Cable (S) to Charge Input Jack (D) on the headphone.
2.Connect the other end of Charge Cable (S) to Charge Output Jack (J) on back of transmitter.
CHARGE SCHEDULE
Use | Charge Time | Play Time |
Initial charge | 24 hours | |
Average | ||
Extended |
Play time as shown above reflects use of batteries in good condition.
Note: The charger will not overcharge the batteries if left on charge longer than shown above. If you will not use the headphones for an extended period of time, it is recommended you unplug the charger cable.
5