■ STARTING ENGINE
1.Rest the unit on a flat, firm place. Keep the
cutting head off the ground and clear of
surrounding objects as it will start rotating
upon starting of the engine.
2.Pump the primer until fuel flows out in the
clear tube.
3.Move the choke lever upward to close the
choke.
4.Shift the ignition switch to the START
position.
Operation
5.While pulling the throttle lever with the little
finger of your left hand, pull the starter
rope.
•Avoid pulling the rope to its end or returning
it by releasing the knob. Such actions can
cause starter failures.
6.When the engine has started, move the
choke lever gradually downward to open
the choke.
7.Allow the engine to warm up for a half
minute before starting operation.
1.When restarting the engine immediately
after stopping it, leave the choke open.
2.Overchoking can make the engine hard to
start due to excess fuel. When the engine
failed to start after several attempts, open
the choke and repeat pulling the rope, or
remove the spark plug and dry it.
NOTE
NOTE
❲
11
❳