RedMax BC3401DL manual  10 , Putting on Waist PAD BC4401DW only, Installing Cutting Head

Set Up

■PUTTING ON WAIST PAD (BC4401DW only)

• Warp the waist pad around the shaft tube and the throttle wire.

■INSTALLING CUTTING HEAD

1.While locking the gear shaft by inserting the attached bar into the upper holder and the gear box, loosen and remove the hexagon bolt(left-handed)

2. Fit the spacer attached to the head assembly between the upper and lower holders. Then screw in the cutting head to the gear shaft over the holders. Hand- tighten it securely.

10 