❲
15
❳
7. Operation
OP10
OP11
• When the brake operates, release the throttle
lever to slow down the engine speed.
Continuous operation with the brake
engaged will generate heat from the clutch
and may cause trouble.
• At machine inspection prior to each job,
check the operating condition of the brake
following the steps below.
1. Start the engine and grasp the handle securely
with both hands.
2. Pulling the throttle lever to maintain the chain
operation, push the brake lever (left-hand guard)
down toward the front using the back of your left
hand.
3.When the brake operates and the chain is
stopped, release the throttle lever.
4. Release the brake.
(1)Releases the brake.
(2)Activates the brake.
■STOPPING ENGINE
1. Release the throttle lever to allow the engine
idling for a few minutes
2. Put the switch to the "O" position. (OP11)
(1)Switch
WARNING