7. Operation

OP9

14

ADJUSTING CARBURETOR (OP9)

The carburetor on your unit has been factory adjusted, but may require fine tuning due to change in operating conditions.

Before adjusting the carburetor, make sure that provided are clean air/fuel filters and fresh, properly mixed fuel.

When adjusting, take the following steps:

NOTE

Be sure to adjust the carburetor with the bar chain attached.

1.H and L needles are restricted within the number of turn as shown below.

H needle –1/4

L needle –1/4

2.Start engine and allow it to warm up in low speed for a few minutes.

3.Turn idle adjusting screw (T) counter-clockwise so that saw chain does not turn. If idling speed is too slow, turn the screw clockwise.

4.Make a test cut adjust the H needle for best cutting power, not for maximum speed.

(1)L needle

(2)H needle

(3)Idle adjusting screw

CHAIN BRAKE (OP10)

The chain brake is a device which stops the chain instantaneously if the chain saw recoils due to kickback.

Normally, the brake is activated automatically by inertial force. It can also be activated manually by pushing the brake lever (left-hand guard) down toward the front.

When the brake operates, a yellow cone pops up from the base of the brake lever.

Releasing the Brake

Pull the brake lever up toward the left-hand handle until it clicks into place.

Page 14
Image 14
RedMax G2500TS manual Adjusting Carburetor OP9, Chain Brake OP10

G2500TS specifications

The RedMax G2500TS is a powerful and innovative tool in the world of outdoor power equipment, specifically designed for professional landscapers and homeowners. With a robust engine and cutting-edge features, the G2500TS is optimized for efficiency and ease of use, making it an essential addition to any toolkit.

One of the standout features of the RedMax G2500TS is its powerful 25.4cc engine, which delivers impressive performance while maintaining fuel efficiency. This engine is designed to provide ample power to tackle a variety of tasks, from trimming thick brush to maintaining finely manicured lawns. The 2-stroke design not only offers powerful output but also contributes to a lightweight construction, allowing users to maneuver the trimmer easily without experiencing fatigue.

The G2500TS utilizes RedMax's advanced anti-vibration technology, which significantly reduces vibrations during operation. This feature enhances user comfort, especially during extended use, making it easier to handle the tool for longer periods without discomfort.

Another noteworthy characteristic is the tool's ergonomic design. The G2500TS features an easy-to-grip handle that allows for a comfortable and secure grip. This ensures precision control while trimming, whether you’re working on large areas or navigating around delicate flower beds.

The RedMax G2500TS also incorporates a semi-automatic trimmer head, which simplifies line loading and reduces downtime. Users can quickly replace trimmer line without needing additional tools, ensuring that work can continue smoothly and efficiently.

Additionally, the trimmer offers a straight shaft design, providing users with extended reach when tackling hard-to-reach areas. This design is particularly valuable for professional landscapers who often encounter obstacles in their work environments.

In terms of durability, the G2500TS is built with high-quality materials that withstand the rigors of heavy use. This ensures longevity and reliability, which are crucial for professionals who depend on their equipment daily.

In summary, the RedMax G2500TS is a well-rounded trimmer that excels in performance, comfort, and durability. With its powerful engine, anti-vibration technology, ergonomic design, and user-friendly features, it is the ideal choice for both demanding professionals and avid gardeners alike. Whether you are looking to maintain a vast property or simply tidying up your backyard, the G2500TS delivers outstanding results every time.