GZ3500T
4. Symbols on the Machine
WARNING
For safe operation and maintenance, symbols are carved or placed on the ma- chine.
According to these indications, please be careful not to make any mistake.
The port to refuel “MIX GASOLINE”
Position: Recoil case (in front of the fuel cap)
The port to fill chain oil
Position: Recoil case (under the oil cap)
Setting the switch to the “O” position, stops the engine immediately. Position: Right side of the rear handle
Starting the engine. If you turn the choke knob to the point of the arrow, you can set the starting mode as follows:
Position:
The screw under the “H” stamp is The
The screw under the “L” stamp is The
The screw at the left of the “T” stamp is the Idle speed adjustment screw. Position: Left side of the rear handle
Shows the directions that the chain brake is released (white arrow) and brake is activated (black arrow).
Position: Front of the chain cover
If you turn the rod with screwdriver follow the arrow to the "" position, the chain oil flows more, and if you turn to the "" position, oil flow is less. (Standard width: 90°)
Position: Bottom of the power unit
■EMISSION CONTROL
An emission control label is located on the engine.
IMPORTANT EMISSIONS INFORMATION
THIS ENGINE MEETS TO 2008*1 U.S. EPA AND 2008*1
CALIFORNIA EXH AND EVP EMISSION REGULATIONS
FOR SI SORE's. COMPLIANCE PERIOD : CATEGORYA
ENGINE FAMILY : 8HQZS.0354BT*2 DISPL.: 35 cc
EMISSION CONTROL SYSTEM : EXH;EM
REFER TO OWNER'S MANUAL FOR MAINTE-
NANCE, SPECIFICATIONS AND ADJUSTMENTS.
MANUFACTURED:
USE JASO FD OR ISO
*1: The year will be changed every year of manufacturing.
*2: The initial number will be changed every year of
manufacturing.
U |
S |