Maintenance

HOW TO INSTALL THE AIR INLET SCREEN TO THE VOLUTE COVER

Put the mark of the air inlet screen to the mark of the volute cover in line.

Turn the air inlet screen clockwise (arrow direction) and make sure it is firmly installed.

Install the screw through the stopper to insure that the air inlet screen does not move

PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE

Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the same time.

Tighten all screws, bolts, and fittings.

Storage

BEFORE STORING THE BLOWER:

1.Drain a fuel tank and push the primer bulb until it becomes empty of fuel.

2.Remove the spark plug and drop a spoonful of 2-cycle oil into the cylider. Crank the engine several time and install the spark plug.

13

Page 13
Image 13
RedMax HBZ2500 manual Storage,  13 , HOW to Install the AIR Inlet Screen to the Volute Cover, Before Storing the Blower