Storage, Disposal, Optional vacuum kit usage

HBZ2610

10. Storage

1.Drain a fuel tank and push the primer bulb until it becomes empty of fuel.

2.Remove the spark plug and drop a spoonful of 2-cycle oil into the cylider. Crank the engine several time and install the spark plug.

3.Store unit in a dry, dust free place, out of the reach of children.

•When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations.

•See the operating instructions included with the vacuum kit.

Case 1. Starting failure

CHECK		PROBABLE CAUSES		ACTION
fuel tank	➞	incorrect fuel	➞ drain it and with correct fuel
fuel filter	➞ fuel filter is clogged		➞	clean
carburetor adjustment screw	➞ out of normal range		➞ adjust to normal range
sparking (no spark)	➞ spark plug is fouled/wet		➞	clean/dry
	➞ plug gap is incorrect		➞ correct (GAP: 0.6 – 0.7 mm)
spark plug	➞	disconnected	➞	retighten

Case 2. Engine starts but does not keep running/Hard re-starting.

CHECK		PROBABLE CAUSES		ACTION
fuel tank	➞ incorrect fuel or staled fuel		➞ drain it and with correct fuel
carburetor adjustment screw	➞ out of normal range		➞ adjust to normal range
muffler,cylinder (exhaust port)	➞	carbon is built-up	➞	wipe away
air cleaner	➞	clogged with dust	➞	wash
cylinder fin, fan cover	➞	clogged with dust	➞	clean

When your unit seems to need further service, please consult with our service shop in your area.

US-14