Set up, Blower Pipe, Installing Support Handle

HBZ2610

6. Set up

■BLOWER PIPE

•Align groove in blower pipe with projection on blower housing (or another blower pipe) and slide the pipe onto the blower housing (or another blower pipe).

Rotate the pipe clockwise to lock it into place.

■INSTALLING SUPPORT HANDLE

•This handle is supplied with the blower.

•Fit the holes of volute and handle, tighten the screws.

•Be sure to tighten the screws straightly.

(1)Support Handle

(2)Holes

(3)Screws

US-8

Page 8

Image 8

RedMax HBZ2610 manual Set up, Blower Pipe, Installing Support Handle, Support Handle Holes Screws

Contents

HBZ2610 Contents Model HBZ2610 SpecificationsParts location Symbols on the machine Emission Control For safe operation Screw Air inlet screen Before use Using the product Fuel safetyAvoid noise problem Transport Maintenance For protecting your body from vibrationProlonged use of a blower, exposing Disposal Set up Installing Support HandleBlower Pipe Support Handle Holes Screws Warranty FuelFuel Gasoline Requirements Fueling the Unit HOW to MIX Fuel Recommended Mixing Ratio Gasoline 50 OILFor Your Engine LIFE, Avoid Adjusting Idle Speed OperationStarting Engine Restarting Engine While Engine is HOT Maintenance Procedures to be Performed After Every 50 Hours of USE MufflerSpark Arrester AIR Inlet Screen Troubleshooting guide StorageDisposal Optional vacuum kit usage Manufacturers Warranty Coverage Owners Warranty ResponsibilitiesWarranty Commencement Date What is Covered Emission Warranty Parts List What is not CoveredHOW to File a Claim Where to GET Warranty Service