Operation
The RedMax stick edger Model HE2601 is designed for edging lawn in gardens, parks, roadsides and so on.
Before starting the engine, take the operating position and adjust the handle position and the wheel height as necessary.
■ADJUSTING HANDLE POSITION
•Loosen the handle bracket screws and re- position the handle to your best operating position.
■ADJUSTING WHEEL HEIGHT
•Loosen the clamp lever and change the wheel height to obtain desired cutting depth.
WARNING
•Never adjust wheel height with the engine running.
■STARTING ENGINE
1.Rest the unit on a flat, firm place. Keep the blade off the ground and clear of the surrounding as it will start rotating upon starting of the engine.
2.Pump the priming pump until fuel flows out in the clear tube.
3.Move the choke lever upward to close the choke.
4.Set the ignition switch to the “start” position. While pulling the throttle lever, push the set button, and release the throttle, then the throttle lever is in to the “start” position.
START
STOP
Ignition
Switch
Throttle set Button