Reebok RBTL69810.0 That the console wire C stays in the track, Be careful not to pinch any wires

9.	With the help of a second person, hold the	9
	handrail assembly (B) upside-down near the
	console assembly (A). Connect the Console
	Ground Wires (6) in the handrail assembly to
	the ground wires in the console assembly.				B
	Insert the console wire (C) into the track in the
	console assembly (A).
	Insert the Ground Wires (6) into the hole in the
	console assembly (A) as you set the handrail as-		A
	sembly (B) in the console assembly. Make sure
	that the console wire (C) stays in the track.				102
	Be careful not to pinch any wires.
					C
			6		Track
			Ground
			Wires
10.	Attach the handrail assembly (B) to the console	10
	assembly (A) with two #8 x 3/4" Washer Head		83	2
	Screws (2). Start both Washer Head Screws
	before tightening either of them. Be careful		B		38
	not to overtighten the Washer Head Screws.
	Attach a Console Clamp (105) to the console		A
	assembly (A) with two #8 x 1" Screws (107).		2		107
	Start both Screws before tightening either of
	them. Be careful not to overtighten the			107
	Screws. Attach the other Console Clamp (105)		105		105
	in the same way.
	Remove the wire ties from the Handrails (82,		38
	83). Press the 5/16" Cage Nuts (38) back into
	place, if necessary.		82
		11