5.Attach the Backrest (7) to the Backrest Frames
(5) with four M6 x 35mm Screws (15) and four M6 Washers (21). Do not tighten the Screws yet.
6.Insert the Pivot Bracket (6) into the slot in the Frame (1). Attach an M8 x 38mm Bolt (18), two Spacers (23), and an M8 Nylon Locknut (24) to the last hole in the Pivot Bracket.
Apply some of the included grease to an M10 x 190mm Bolt (14). Attach the Backrest Frames
(5)to the Frame (1) with the Bolt and an M10 Nylon Locknut (19). Do not overtighten the
Nylon Locknut; the Backrest Frames must pivot easily.
See step 4. Tighten the four M8 Nylon
Locknuts (24).
See step 5. Tighten the four M6 x 35mm Screws (15).
5 |
|
7 | 5 |
| 21 |
| 15 |
| 21 |
| 15 |
| 21 |
21 | 15 |
| 15 |
6 |
|
19 |
|
| 5 |
1 |
|
| 6 |
| Grease |
24 | 14 |
23 |
|
| 18 |
8 |
|
