Reebok Fitness RBBE0787.1 manual Make Assembly Easier, Locknuts yet

ASSEMBLY

	Make Assembly Easier	•	Place all parts in a cleared area and remove the
			packing materials. Do not dispose of the packing
	Everything in this manual is designed to ensure		materials until assembly is completed.
	that the weight bench can be assembled suc-	•	As you assemble the weight bench, make sure all
	cessfully by almost anyone. By setting aside		parts are oriented as shown in the drawings.
	plenty of time, assembly will go smoothly.
		•	Tighten all parts as you assemble them, unless
Before beginning assembly, carefully read the fol-			instructed to do otherwise.
		•	For help identifying small parts, use the PART
lowing information and instructions:
•	To hire an authorized service technician to		IDENTIFICATION CHART on page 5.
		•	Assembly requires only the included tools.
	assemble the weight bench, call 1-800-445-2480.
•	Assembly requires two persons.		Assembly may be more convenient if you have a
			socket set, a set of open-end or closed-end
•	Make sure that there is enough clearance to walk		wrenches, or a set of ratchet wrenches.

around the weight bench as you assemble it.

1.

Before beginning assembly, make sure that you have read and understand the information in the box above.

Orient the Front Stabilizer (2) as shown. Attach the Front Stabilizer and the Frame (1) to the Front Leg (25) with four M8 x 63mm Bolts (16), four M8 Washers (20), and four M8 Nylon Locknuts (24). Do not tighten the Nylon

1

16 20

1

Locknuts yet.

2024

16

25

224

Holes

6