7.Apply a small amount of the included grease to an M10 x 200mm Button Bolt (19). While pulling the Seat Pin (12), insert the Adjustment Arm (6) into the Seat Frame (4). Then, release the Seat Pin.
Attach the Backrest Frame (5) to the Seat Frame with the M10 x 200mm Button Bolt (19) and an M10 Nylon Locknut (13).
8.Attach the Seat (8) to the Seat Frame (4) with four M6 x 45mm Button Screws (17) and four M6 Washers (26).
9.Make sure that all parts are properly tightened before using the weight bench.
7 |
|
|
| 13 |
|
4 | 5 | 6 |
|
| 19 |
| 12 | Apply |
|
| Grease |
8 |
8 |
4 |
26 |
17 |
26 |
17 |
9
