Reebok Fitness RBTL71930 manual Assembly

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench

and your own 9/16” wrench , rubber mallet , and Phillips screwdriver .

Use the part chart below in identify small parts used in assembly. Extra parts may be included.

Thin Base Pad (103)–2
	Thick Base Pad (75)–2		Star Washer (113)–4
1/2” Tek Screw	3/4” Tek Screw	1/2" Screw (51)–10	Latch Screw (36)–2
(22)–8	(12)–4
		Base Leg Bolt (77)–4
Base Leg Nut (70)–4
		Console Bolt (42)–4

1.With the help of another person, carefully tip the treadmill onto its left side. Have a second person hold the treadmill.

Attach a Base Leg (78) to the Base (117) with two Base Leg Bolts (77) and two Base Leg Nuts (70). Make sure that the Base Pad (75) is in the position shown. Attach the other Base Leg as described above.

Attach two Thin Base Pads (103) (only one is shown) and two Thick Base Pads (75) (only one is shown) to the Base (117) with four 3/4” Tek Screws (12).

1
	103
77	12
75
78
77	75
70	12
117

6