REL Acoustics Storm manual To Connect to a Dedicated Sub-wooferOutput, See Fig

Models: Storm

1 13
Download 13 pages 34.17 Kb
Page 4
Image 4
To Connect to a Dedicated Sub-woofer Output:

R/H

L/H

 

R B

R B

Amplifier Speaker

 

 

 

 

Outputs

Red

Yellow

Neutrik Speakon

Interconnect

(Supplied)

Black

To Subwoofer

High Level Input

Fig. 1

2.Connect the Mains lead to STORM and to the mains and switch ON.

To Connect to a Dedicated Sub-woofer Output:

See Fig. 2

1.For this connection it will be necessary to use whatever type of connector is needed by this output. Normally it would be a phono type

connector. For this method of connection a phono to phono type interconnect is required, available from your dealer.

Note:- If only a single phono subwoofer output is available, either use a ”y” splitter to connect the two phono plugs from the REL or use a single phono to phono interconnect. This will reduce the volume by 6db.

R/H L/H

Amplifier Dedicated

Subwoofer Outputs

Phono to Phono Interconnect (Optional Extra)

See Fig. 2 To Subwoofer

Low Level Input

Fig. 2

2.Plug one end of the phono to phono interconnect into the dedicated sub-woofer outputs on your power amplifier or surround processor and the other end into the line level input on STORM.

4

Page 4
Image 4
REL Acoustics Storm manual To Connect to a Dedicated Sub-wooferOutput, See Fig