ReliOn HEM-412CREL manual HOW to Apply the ARM Cuff

HOW TO APPLY THE ARM CUFF

1.If the cuff is assembled correctly, the sewn hook material will be on the outside of the cuff loop and the metal D-ring will not touch your skin.

2.Pass the end of the cuff furthest from the tubing through the metal D-ring to form a loop. The smooth cloth should be on the inside of the cuff loop.

3.Put your left arm through the cuff loop. The bottom of the cuff should be approximately 1/2 inch above the elbow. The cuff tab on the cuff should lie over the brachial artery on the inside of the arm. Tube should run down center of arm even with middle finger.

Pile Material

Sewn Hook

Material

D-Ring

Smooth Cloth

1/2 inch (12.7 mm)

Cuff tab

14