Remington 100582-01, 100582-02 Storage, Replacement Parts, Replacing Saw Chain, Continued

CLEANING AND MAINTENANCE

Continued

Replacing Saw Chain

Replace chain when cutters are too worn to sharpen or when chain breaks. Only use replacement chain noted in this manual. Always include new drive sprocket when replacing chain. This will maintain proper driving of chain. Note: For proper chain and drive sprocket, see Replacement Parts, below.

STORAGE

If storing saw for more than 30 days, follow steps below.

1.Drain oil tank.

2.Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum based solvent or mild soap and water mixture.

3.Dry guide bar and chain.

4.Place chain in container filled with oil. This will prevent rust.

5.Wipe a thin coating of oil over surface of guide bar.

6.Wipe off outside of saw body. Do this with soft cloth dampened with a mild soap and water mixture.

7.Store chain saw

•in a high or locked place, out of children’s reach

•in a dry place

•in a carrying case or with scabbard over guide bar

•with oil cap tight and saw upside down to prevent excess oil seepage

REPLACEMENT PARTS

!WARNING

Use only replacement parts described in this manual. Use of other parts could damage saw or injure operator.

Purchase these parts from your local dealer.

Part Number	Description
097572-03S	Guide bar, 400 mm (16")
091375S	Chain, 400 mm (16")
097570-01	Guide bar, 355 mm (14")
091374S	Chain, 355 mm (14")
075752	Drive sprocket
079417-03	Wrench/Screwdriver

14 101241