Remington How to Change Battery in Trimmer and Troubleshoot Shaver Charging Issues

Removing the Headguard

Before operating your shaver, remove the headguard, which protects the screen and cutter assembly. It is important to remove the headguard correctly to avoid damaging the clips that hold it firmly to the shaver.

■Press lightly on the top of the head guard.

■Lift the lower rear edge.

■Pull the headguard away from the shaver.

Shaver Operation

Your shaver has a toggle power button that has different operating characteristics depending on which model shaver you have.

Models MS3-1700 & MS3-2700:

Lower side:ON; Upper side:OFF

Models MS3-3700 & MS3-4700:

Lower side:ON/OFF; Upper side: Activates and deactivates the high- speed Turbo setting.

Trimmer Operation

®

Your MicroScreen shaver is equipped with a 3-position trimmer.

Position 1: Retracted and out of the way.

Position 2: Long hair intercept with floating action. (Deployed by pressing LEFT side of trimmer button) Position 3: Sideburn / Mustache Trimmer (Deployed by pressing RIGHT side of trimmer button)

The Trimmer can be manually retracted to setting 1 from either setting 2 or setting 3, by pressing down on the trimmer.

Charging

Prior to using your shaver for the first time, put it on charge for 24 hours.

To charge your shaver:

■Make sure your shaver is turned off.

■Connect the cord to the shaver and then the charging adapter to the electric outlet.A charging indicator light will come on.

■Your shaver cannot be overcharged,so you can leave it plugged in and charging between shaves.

■Use only the charging adapter supplied with the shaver.

■The MS3-1700 is designed for cordless operation only. Plugging in the cord will not provide the power to shave.The MS3-2700/ 3700/4700 on the other hand,come with a special feature that allows you to run the shaver directly off the cord. Your shaver will not recharge while you are shaving,so after shaving directly from the cord,turn the unit off and set aside to charge.

■The MS3-2700/3700/4700 will provide up to two weeks worth of shaving after a one hour charge or a single shave after five minutes of charging.

Model MS3-1700

The green light indicates that the shaver is charging. Full charge is achieved in 16 hours.

Model MS3-2700

A green indicator light shows whether the shaver is either fully charged or charging.A red low-battery indicator illuminates to show when the shaver needs recharging. This also indicates approximately 5 minutes of shaving time left when indicator first comes on.

Model MS3-3700

A green lighted fuel gauge displays the amount of charge remaining in 20% increments.When only 20% of the charge remains,the recharge red warning light illuminates.

Model MS3-4700

An LCD display numeric indicator shows shaver charge status in

minutes remaining. When the Plug icon comes on, it indicates approximately 5 t0 6 minutes of shaving time left.

Troubleshooting:

■If your MS3-2700/3700/4700 shaver battery is completely discharged or the shaver has not been used for an extended period of time,the shaver may not start when operated using the cord.If this condition occurs, charge the shaver for approximately five minutes before shaving.

■Your MS3-2700/3700/4700 cord/cordless shaver should not be used strictly as a cord-operated shaver, as continued cord only use will result in reduction of battery life.

■In order to preserve the life of the batteries,they should be fully discharged every six months and then fully charged for 24 hours.

Worldwide Voltage (MS3-2700/3700/4700 ONLY)

You can take your MS3-2700/3700/4700 shaver with you when you travel to just about anywhere in the world. Yourshaver features worldwide automatic dual voltage conversion providing AC current between 100-240 volts AC,50-60 Hz.Just plug it in to the local outlet (you may need an adapter plug) and use as usual. Your shaver will convert automatically to the local current requirements, if any.

The MS3-1700 model is a single voltage model (120 VAC,60 Hz).

Battery Removal:

When your rechargeable shaver reaches the end of its useful life, the batteries may be removed from the shaver and be recycled or disposed of properly in accordance with your state and local requirements,if any. If this is not required by law, you may elect to dispose of the shaver without removing the batteries.

CAUTION: DO NOT PUT IN FIRE OR MUTILATE YOUR BATTERIES WHEN DISPOSING AS THEY MAY BURST OR RELEASE TOXIC MATE- RIALS. DO NOT SHORT CIRCUIT AS IT MAY CAUSE BURNS.DIS- POSE PROPERLY IN ACCORDANCE WITH YOUR LOCAL AND STATE REQUIREMENTS FOR NICKEL-METAL HYDRIDE BATTERIES.