THE FOLLOWING PROCEDURE SHOULD BE FOLLOWED

IF YOU CHOOSE TO REMOVE THE BATTERY:

To avoid a possible electric shock hazard, unplug cord from electric outlet and shaver.

Remove screen assembly by pressing the two side buttons until the head assembly pulls off.

Remove the four corner screws holding the upper housing in place. Squeeze the ends of the two blade assemblies to bring them into alignment with each other. Pull the housing upward to remove.

Pry off the two side panels.

Remove the single screw holding the back housing in place.

Pull the back housing off to expose the batteries.

Pry and lift the battery assembly up from the printed circuit board.

Cut the wires on both ends of each battery to remove them from the shaver.

®

®

Remington Titanium MicroScreen

UltraModels

Which model is yours?

MS3-1700Cordless operation,rechargeable with

(1 LED) indicator light.16 hour charge. Single voltage:120 volts AC,60 Hz.

MS3-2700Cord and cordless operation,rechargeable

(2 LED's) with charging and low battery indicator lights, and 1-hour quick charge feature.

Worldwide voltage:100-240 volts AC,50-60 Hz.

MS3-3700Cord and cordless operation,rechargeable

(7 LED's) with percentage of charge and low batter y indicator lights,speed selector with turbo indicator light,and 1-hour quick charge feature. Worldwide voltage:100-240 volts AC,50-60 Hz.

MS3-4700Cord and cordless operation,rechargeable (LCD Display) with turbo switch and 1-hour quick charge

feature.Smart Shaver LCD with shaving time remaining indication,low battery, turbo indicator, cleaning and screen replacement icons. Worldwide voltage:100-240 volts AC,50-60 Hz.

Page 5
Image 5
Remington MS3-2700, MS3-1700, MS3-3700, MS3-4700 Remington Titanium MicroScreen UltraModels, Which model is yours?