Chapter 3: Blower/Vac Assembly

Converting fromBlower to Vacuum, continued

4.Connect the tubes to the vacuum tube adapter (see Figure 3-9).Align the tab on the top tube with the notch on the vacuum tube adapter. Press together until you hear a “snap”.

5.Position front of vacuum tube adapter assembly over motor housing hook (see Figure 3-10).

6.Pivot vacuum tube adapter assembly to bottom of blower/vac housing. Slightly press locking lever on vacu- um tube adapter to allow adapter to lock into place (see Figures 3-11 and 3-12).

Notch

2

 

5

Tab

Figure 3-11: Pivoting vacuum tube adapter to

blower/vac housing

 

Figure 3-9: Connecting vacuum tubes to vacuum tube adapter

3

Figure 3-12: Pressing locking lever

4

Figure 3-10: Attaching vacuum tube adapter to motor housing hook