OWNER’S MANUAL

SAFETY

WARNINGS

continued

KICKBACK

WARNING: Kickback may oc- cur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back towards the opera- tor. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back to- wards the operator. Either of these reactions may cause you to lose control of the saw which could result in serious injury to user.

Kickback Safety Devices On This Saw

This saw has a low-kickback chain and reduced kickback guide bar. Both items reduce the chance of kickback, however, kickback can still occur with this saw.

The following steps will reduce the risk of kickback.

•Use both hands - one gripping the handle and the other gripping the pole. Use firm grip. Thumbs and fingers must wrap around pole and handle.

•Keep all safety items in place on saw. Make sure they work properly.

•Do not overreach or extend arms above shoulder height.

•Keep solid footing and balance at all times.

•Never try cutting through two branches at the same time. Only cut one at a time.

•Do not bury guide bar nose or try plunge cut (boring into wood using guide bar nose).

•Watch for shifting of wood or other forces that may pinch chain.

•Use extreme caution when re-entering a previous cut.

•Use low-kickback chain and guide bar supplied with the chain saw. Only use replacement parts listed for the pole saw.

•Never use dull or loose chain. Keep chain sharp and adjusted correctly.

Saw Maintenance and Kickback Safety

Follow maintenance instructions in the chain saw manual. Proper cleaning of saw and chain and guide bar maintenance can reduce chances of kickback. Inspect and maintain saw after each use. This will increase the service life of your saw. Note: Even with proper sharpening, risk of kickback can increase with each sharpening.

MAINTENANCE AND STORAGE OF POLE SAW

Unplug Pole Saw from power source and follow maintenance and storage procedures outlined in the Maintenance and Storage section of your chain saw manual.

POLE SAW

TRIMMING PRECAUTIONS

Never stand directly under the limb you are trimming. Always position yourself out of the path of falling debris.

Never stand on a ladder or other type of unstable support while using the Pole Saw.

Always use both hands to operate Pole Saw. Keep a firm, steady pres- sure on the Pole Saw while cutting but do not try to force the saw through the wood.

Do not use the Pole Saw to cut limbs larger in diameter than the length of the guide bar.

Keep other persons away from cut- ting end of polesaw and at a safe distance from work area.

Do not use Pole Saw near cable, elec- tric power or telephone lines. Main- tain a minimum clearance of 10 feet from all power lines.

104296

3

Page 2 Page 4
Page 3
Image 3
Remington RPS 96 owner manual Maintenance and Storage of Pole SAW, Pole SAW Trimming Precautions, Kickback
Page 2 Page 4

RPS 96 specifications

The Remington RPS 96 stands out as a notable offering in the realm of modern firearms, particularly within the realm of tactical shotguns. Designed with versatility and practicality in mind, this shotgun caters to a variety of users, from law enforcement personnel to civilian enthusiasts seeking a reliable home defense option.

One of the principal features of the Remington RPS 96 is its semi-automatic operation, which allows for rapid follow-up shots without the need for manual cycling of the action. This is particularly advantageous in high-stress situations, where time can be a critical factor. The shotgun utilizes an innovative gas-operated system that efficiently cycles the action while minimizing recoil, making it more manageable for shooters of varying experience levels.

Another notable characteristic of the RPS 96 is its magazine capacity. The shotgun typically features a detachable magazine that can hold multiple rounds, thus enhancing the user’s firepower during engagements. The design also incorporates a robust, lightweight polymer frame, contributing to the overall maneuverability of the weapon. This helps shooters maintain control and accuracy, even in dynamic situations.

The RPS 96 is equipped with adjustable sights that facilitate quick target acquisition, an essential feature for tactical applications. Furthermore, the shotgun allows users to customize their setup with various rail segments that enable the attachment of optics, lights, or lasers, enhancing operational effectiveness in low-light conditions.

In terms of safety, Remington has integrated several key features into the RPS 96. The shotgun comes with an ambidextrous safety selector, which provides ease of use for both right-handed and left-handed shooters. Additionally, the design includes a loading indicator that helps users ascertain the status of the chamber, promoting safe handling practices.

Durability is a cornerstone of the RPS 96’s design. Built to withstand the rigors of tactical use, the materials used in its construction are resistant to corrosion and wear, ensuring longevity and reliability. The shotgun also features a rail-mounted sling attachment point, which aids in transport and enhances readiness for action.

Overall, the Remington RPS 96 is a remarkable fusion of modern technology and thoughtful design. Its combination of semi-automatic operation, adjustable features, and robust construction makes it a strong contender in today’s competitive firearm market. Whether used for sport shooting, home defense, or tactical applications, the RPS 96 delivers performance and reliability that gun enthusiasts and professionals can depend on.
Top Page Image Contents