®
8’ ELECTRIC TELESCOPING POLE SAW
PRODUCT |
|
|
IDENTIFICATION | Hand Guard | Saw Chain |
| ||
|
| |
| Oil Cap |
|
Guide Bar
|
| Power |
|
| Cord |
|
| Coupling |
| Grip Area | Nut |
| Handle Bracket | |
|
| |
|
| Inner Pole |
Outer Pole |
| Tighten |
Loosen
Trigger
Switch
Switch
Power Cord
Figure 1 - Pole Saw Product Identification
POLE SAW NAMES AND TERMS
Coupling Nut Threaded collar (loosen to slide inner pole, tighten to hold pole in position).
Guide Bar Metal bar that extends from saw body. The guide bar supports and guides chain.
Inner Pole The moveable section of tub- ing to which the saw is attached.
Kickback Quick backward and upward motion of guide bar. Kickback may occur when tip of guide bar touches an object while chain is moving. The guide bar will kick up and back towards operator.
Oiler Control System for oiling guide bar and chain.
Outer Pole Retains the moveable inner pole.
Saw Chain (Chain) Loop of chain having cutting teeth for cutting wood. The motor drives chain. The guide bar supports chain.
Sprocket Toothed wheel that drives chain.
Switch Device that completes or interrupts electrical circuit to motor of saw.
Switch Lockout Device that reduces accidental starting of saw.
Trigger Device that turns saw on and off. Squeezing trigger turns saw on.
Releasing trigger turns saw off.
Trimming (Pruning) Process of cutting limb(s) from a living tree.
Undercut An upward cut from underside of log or limb. This is done while in normal cutting position and cutting with top of guide bar.
4 | 104296 |