Remington Remington Code, XT-100 Cleaning & Maintenance, Cleaning Your Shaver, Cleaning Cautions

Cleaning & Maintenance

Cleaning Your Shaver

To assure smooth, efficient perfor- mance, it is important to clean your shaver. Cleaning your Remington® Shaver is easy.

1.Remove the Head Assembly by holding onto the sides of the Head Assembly at the arrows, press the two head release buttons while gently lifting the assembly away from the shaver.

2.Tap the base of the Head Assembly lightly on a flat surface. This should dislodge most of the hairs trapped within it. To guard against inadvertent damage, do not remove the Foil Assembly.

3.Next, clean the Cutter Assembly while it is still on the shaver. Hold the shaver and Cutter Assembly as shown, and using the brush

supplied, lightly brush and blow the hair clippings from between the blades.

Tip: To help reduce wear and tear, spray the Head Assembly with Remington® Spray Shaver-Saver®Lubricant after every shave. This helps remove hairs while keeping your shaver operating smoothly.

8

33236_XT-100_IB-Revised.indd 8-9

Cleaning Cautions

■Do not use an aggressive cleansing agent as this may destroy the shaver coatings.

■Do not remove or replace the head assembly while shaver is running as it may cause damage to the unit's screen or cutter.

Trimmer Care

Cleaning

■When you clean your shaver, just brush off any clippings that may accumulate around the trimmer assembly.

■Every six months apply a drop of light machine oil one-third and two-thirds of the way along the blade.

■Using your fingertip, spread the oil along the teeth.

■Run the trimmer for a few seconds to distribute oil.

9

2/1/07 3:04:54 PM