2 Chapter 1: Important Safety Information

WHILE OPERATING

TRIMMER

1.Stay alert. Watch what you are doing. Use common sense.

2.Be aware of extension cord while operat- ing trimmer. Be careful not to trip over extension cord. Keep extension cord away from cutter blades at all times.

3.Avoid unintentional starting. Do not carry plugged-in trimmer with finger on switch. Be sure switch is OFF when plugging in trimmer.

4.Do not overreach. Keep proper foot- ing and balance at all times when operating trimmer.

DANGER - RISK OF CUT – Keep hands away from blades at all times.Keepbothhandsonhandles when trimming. Do not attempt to remove cut material nor hold material to be cut when blades are moving. Do not grasp the exposed cutting blades or cutting edges when picking up or holding the trimmer.

CAUTION - Blades coast after turn off.

5.Disconnect the trimmer from the power supply

•when not in use

•before servicing

•when clearing jammed material from blades

•when moving from one worksite to another

6.Do not force trimmer. It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.

7.Do not abuse power cord. Never carry trimmer by power cord. Never yank cord to disconnect from receptacle. Keep power cord from heat, oil, and sharp edges.

8.Before starting trimmer, make sure blades are not touching anything.

MAINTENANCE AND STORAGE OF TRIMMER

1.Maintain trimmer with care.

•Keep cutting edge sharp and clean for best performance and to reduce the risk of injury.

•Follow instruction for lubricating

•Inspect trimmer cord periodically, and if damaged, have it repaired by a qualified service facility.

•Inspect extension cords periodically and replace if damaged.

•If trimmer is not working properly, has been dropped, damaged, left outdoors, or dropped into water, have it repaired by a qualified ser- vice center.

•Keep handles dry, clean, and free from oil and grease.

2.Check damaged parts.

•If a part is damaged, carefully check the damaged part before using the trimmer. Make sure the part will operate properly and perform its intended function.

•Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation.

•A guard or other part that is dam- aged should be properly repaired or replaced by an qualified service center unless indicated elsewhere in this manual.

3.Servicing of Double-Insulated Tools:

•In a double-insulated tool, two systems of insulation are provided instead of grounding. No ground- ing means is provided on a double- insulated tool, nor should a means for grounding be added to the tool. Servicing a double-insulated tool requires extreme care and knowl- edge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated tool must be identical to the parts they replace.

4.Store idle trimmer indoors.When not in use, store trimmer and extension cord indoors in a dry location. Store trimmer above the reach of children or in a locked area out of the reach of children.

This manual is your guide to safe and proper operation of the trimmer.

SAVE THESE

INSTRUCTIONS.

118036

Page 5 Page 7
Page 6
Image 6
Remington Power Tools HT3218A, HT4022A While Operating Trimmer, Stay alert. Watch what you are doing. Use common sense
Page 5 Page 7

HT3218A, HT4022A specifications

The Remington Power Tools HT3218A and HT4022A are two exceptional models that cater to both amateur gardeners and seasoned landscapers alike. Renowned for their reliability and efficiency, these hedge trimmers integrate advanced technologies and user-friendly features to streamline the trimming process and enhance overall performance.

The HT3218A is a robust 18-inch electric hedge trimmer powered by a 3.2 Amp motor. Its lightweight design, weighing only around 5.5 pounds, ensures effortless maneuvering, allowing users to tackle hedges and shrubs without undue strain. One of the standout features of this model is its dual-action blades, which not only provide a clean, precise cut but also reduce vibration during operation, making trimming tasks more comfortable. The blade spacing is designed to handle branches up to 5/8 inch thick, making the HT3218A suitable for various trimming needs.

On the other hand, the HT4022A takes performance up a notch with its 22-inch dual-action cutting blades and a more powerful 4 Amp motor. This model is specifically designed for larger and denser hedges, making it ideal for more extensive landscaping projects. The extended reach of the 22-inch blades allows users to cover more ground with each pass, enhancing efficiency. Like its counterpart, the HT4022A minimizes vibration for smoother handling, thus making long trimming sessions less tiring.

Both models come equipped with ergonomic, cushioned handles for improved grip and comfort during use. Additionally, the safety features include a safety switch that prevents accidental starts, ensuring peace of mind while operating the tools. The lightweight and well-balanced design of both trimmers minimizes fatigue, enabling users to work for extended periods without discomfort.

What sets these hedge trimmers apart is their excellent build quality and commitment to durability. Designed for regular use, they withstand the rigors of outdoor conditions, making them a valuable investment for garden maintenance. Furthermore, the easy-to-maintain design allows users to keep their tools in top shape with minimal effort.

In summary, the Remington Power Tools HT3218A and HT4022A hedge trimmers offer a winning combination of power, efficiency, and user-friendly features, making them top choices for anyone looking to maintain a pristine garden landscape. With these tools at hand, achieving a well-manicured hedge is not only achievable but also enjoyable.
Top Page Image Contents