Remington Power Tools HT5024PHT Rotating Handle, Rear handle of this tool is designed to

Chapter 3: Trimmer Operation

Rotating Handle

The rear handle of this tool is designed to

rotate 90° to either side of vertical (5 locking		Locked Position
postions).This allows for comfortable hand
andwristorientationduringvariouscutting
positions.Note: As a safety precaution,the
rear handle will not rotate if the rear handle
trigger switch is depressed.
Follow the steps below to operate the
pivoting handle.
1. Slide rear handle release button
toward rear of motor housing (see
Figure 3-9).
2. Rotate the rear handle left or right	Figure 3-9: Sliding rear handle release button toward rear	Figure 3-11: Arrows indicating preset locking positions
to desired preset position (see Figure	of motor housing
3-10).
IMPORTANT: The rear handle has 5
preset locking positions indicated
by arrows on the motor housing
(see Figure 3-11). The trimmer will
not operate unless the rear handle is
locked into one of these positions.
3. Release rear handle release button to
allow handle to lock in position (see
Figure 3-12).

Figure 3-10: Rotating rear handle Figure 3-12: Rear handle locked into position

120134