Renesas H8S2215R

Damage to the microcontroller can be sustained with

incorrect settings.

• Confirm the mode pin settings.

• Press <Next>.

• The following warning dialog will be

displayed.

• Press <OK>.

Damage to the microcontroller can be sustained with

incorrect settings.

• Confirm the mode pin settings.

• Press <Finish>.

The Flash configuration has now been completed.

If you have changed any workspace settings, now is a good time to save the workspace.

• Select [File’ -> ‘Save Workspace’].

Contents

Main REG10J0023-0100 RSK H8S2215R Tutorial Manual Renesas Starter Kit RENESAS SINGLE-CHIP MICROCOMPUTER Rev.1.00 Revision date 12.01.2007 www.renesas.com Table of Contents Chapter 1. Preface Chapter 2. Introduction Chapter 3. Tutorial Project Workspace Chapter 4. Project Workspace 4.1. Introduction 4.2. Creating a new Project Workspace 4.3. Build Configurations and Debug Sessions 4.3.1. Build Configuration 4.3.2. Debug Session Chapter 5. Building the Tutorial Project 5.1. Building Code 5.2. Connecting the debugger 5.3. Connecting to the target with E8Direct & HMon Page Page Page 5.3.1. Connecting To HMon Warning: Page Chapter 6. Downloading and Running the Tutorial Page Page Page Page Chapter 7. Project Files 7.1. Standard Project Files 7.1.1. Initialisation code (Resetprg.c / resetprg.h) Page 7.1.3. Main Tutorial Code (main.c / main.h) Chapter 8. Additional Information Page Renesas Starter Kit for H8S2215R Tutorial Manual