M306NKT-EPB User’s Manual 1. Outline
REJ10J0519-0200 Rev.2.00 Oct. 16, 2006 Page 19 of 104
Table 1.6 Specifications of the M306NKT-EPB (2/2)
Host machine interface
- LPT parallel (ECP, EPP, Byte/compatibility and Nibble/compatibility modes)
- USB (USB 1.1, full-speed) *1
- LAN (10BASE-T)
Power supply to emulator Supplied from included AC adapter (power supply voltage: 100--240V, 50/60Hz)
Operating temperature 5 to 35°C (no dew)
Storage temperature -10 to 60°C (no dew)
Power supply to emulation pr obe Supplied from the DC power supply of the emulator main unit
For 100-pin 0.65mm pitch LCC:
M30800T-PTC (included)
For 100-pin 0.65mm pitch QFP (PRQP0100JB-A):
(1) M3T-F160-100NRB (not included)
(2) M30800T-PTC (included)
+ M3T-100LCC-DMS (not included)
+ M3T-DIRECT100S (not included)
(3) M30800T-PTC (included)
+ M3T-100LCC-DMS (not included)
+ M3T-DUMMY100S (not included)
M16C/6N4
M16C/6N5
For 100-pin 0.5mm pitch LQFP (PLQP0100KB-A):
(1) M3T-F160-100NSD (not included)
(2) M30800T-PTC (included)
+ M3T-100LCC-QSD (not included)
For 100-pin 0.5mm pitch LQFP (PLQP0100KB-A):
(1) M3T-F160-100NSD (not included)
(2) M30800T-PTC (included)
+ M3T-100LCC-QSD (not included)
Connection to user system
(see 2.9 "Connecting the User
System" on page 31)
M16C/6NK
M16C/6NL
M16C/6NM
M16C/6NN For 128-pin 0.5mm pitch LQFP (PLQP0128KB-A):
(1) M3T-FLX-128NRD (not included)
*1 Available to connect the host machine that supports USB 2.0.
With the USB interface, not all hardware (such as host machine, USB devices, USB hub) combination will work and
guaranteed.