M306NKT-EPB User’s Manual 3. Usage (How to Use the Emulator Debugger)
REJ10J0519-0200 Rev.2.00 Oct. 16, 2006 Page 62 of 104
3.3 Hardware Breakpoint Setting Window
(1) Breakpoint setup dialog box
1. Opening the hardware breakpoint setup dialog box
Hardware breakpoint
Clicking this button opens the hardware breakpoint setup dialog box.
2. Hardware breakpoint setting window
H/W Break Point Setting window in initial state
Select the “Enable H/W Break” check box, and this break function will
be enabled, allowing you to set hardware breakpoints.
Setting break event
Click the event line at which you want set a break event.
3. Opening the break event setting dialog box
Specifying the event type
Click to select the event type you want to set.
- FETCH
Detects an instruction prefetch.
- DATA ACCESS
Detects a memory access.
- BIT SYMBOL
Detects a bit access.
- INTERRUPT
Detects an interrupt occurrence or interrupt termination.
- TRIGGER
Detects a signal from the external trace signal input cable.