Renesas M30880T-EPB - page 52

M30880T-EPB User’s Manual 3. Usage (How to Use the Emulator Debugger)
REJ10J0497-0100Z Rev.1.00 January 16, 2005 Page 52 of 100
(2) Debugging Information tab
1. Specifying the compiler used and the object format
(3) Reset tab
1. Resetting the target after downloading
Specifying the compiler used and the objec
t
format
Specify the compiler you are using and the format of the
object file output by the compiler.
- Compiler
Select the compiler you are using.
(By default, the C compiler from Renesas is selected.)
- Object Format
Select the format of the object file that is output by the
compiler you are using.
Specifying the method for storing debug
information
There are two methods for storing debug information: on-
memory method where data is held in memory and an on-
demand method where data is held in a temporary file.
- On Memory
This method helps to speed up processing if you
r
computer has sufficient memory.
- On Demand
This method helps to reduce the amount of memory
needed. To use this method, select the “On Demand”
check box.
Resetting the target after downloading
Specify whether or not to reset the target immediately afte
r
downloading the user program.
- Do Reset
Resets the target (default).
- Do Not Reset
Does not reset the target.
The option you have specified here remains effective the
next time you start up.