Rev.1.01 2007.02.16
RJJ10J1643-0101
192
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN21 Uses AN21 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN22 Uses AN22 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN23 Uses AN23 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN24 Uses AN24 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN25 Uses AN25 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN26 Uses AN26 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN27 Uses AN27 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN30 Uses AN30 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN31 Uses AN31 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_AN32 Uses AN32 pin for the analog input pin.
Selectable only when one-shot mode or repeat mode is used.
RAPI_P0_GROUP Uses port P0 group for the analog input pin. Selectable only when
sweep mode, repeat sweep mode 0, simultaneous sampling sweep
mode, delayed trigger mode 0, delayed trigger mode 1, or repeat sweep
mode 1 is used.
RAPI_P10_GROUP Uses port P10 group for the analog input pin. Selectable only when
sweep mode, repeat sweep mode 0, simultaneous sampling sweep
mode, delayed trigger mode 0, delayed trigger mode 1, or repeat sweep
mode 1 is used.
RAPI_P1P9_GROUP Uses port P1 /P9 group for the analog input pin. Selectable only when
sweep mode, repeat sweep mode 0, simultaneous sampling sweep
mode, delayed trigger mode 0, delayed trigger mode 1, or repeat sweep
mode 1 is used.
RAPI_P9_GROUP Uses port P9 group for the analog input pin. Selectable only when
sweep mode, repeat sweep mode 0, simultaneous sampling sweep
mode, delayed trigger mode 0, delayed trigger mode 1, or repeat sweep
mode 1 is used.
RAPI_AD_ON Sets the A/D converter to start operating.
RAPI_AD_OFF Sets the A/D converter to stop operating.
(R8C)
RAPI_AN0 Uses AN0 pin for the analog input pin.
RAPI_AN1 Uses AN1 pin for the analog input pin.
RAPI_AN2 Uses AN2 pin for the analog input pin.
RAPI_AN3 Uses AN3 pin for the analog input pin.