Rev.1.01 2007.02.16
RJJ10J1643-0101
194
Selectable only when sweep mode or repeat sweep mode 0 is used.
RAPI_AN4_GROUP Uses AN4-AN7 pins group for the analog input pin.
Selectable only when sweep mode or repeat sweep mode 0 is used.
RAPI_AN8_GROUP Uses AN8-AN11 pins group for the analog input pin.
Selectable only when sweep mode or repeat sweep mode 0 is used.
RAPI_AN12_GROUP Uses AN12-AN15 pins group for the analog input pin.
Selectable only when sweep mode or repeat sweep mode 0 is used.
RAPI_AD_ON Sets the A/D converter to start operating.
RAPI_AD_OFF Sets the A/D converter to stop operating.
[data2]
(M16C)
The set value differs with the A/D conversion mode used.
One-shot mode Specify 1.
Repeat mode
Single sweep mode Specify 2, 4, 6, or 8.
Repeat sweep mode 0
Simultaneous sampling mode
Delayed trigger mode 0
Delayed trigger mode 1
Repeat sweep mode 1 Specify 1, 2, 3, or 4.
(R8C)
Specify 1.
(H8/300H)
One-shot mode Specify 1.
Repeat mode
Single sweep mode Specify 1, 2, 3, or 4.
Repeat sweep mode 0
Return value
If A/D converter was successfully controlled, RAPI_TRUE is returned; if failed,
RAPI_FALSE is returned.
Functionality A/D converter
Reference __CreateADC, __DestroyADC, __GetADC, __GetADCAll
Remark •
If an undefined value is specified in the first argument, operation of the API cannot
be guaranteed.
• T he specifiable analog input pins differ with each CPU used.
Program example
#include "rapi_ad_r8c_13.h"