ResMed Mirage Micro manual Limited Warranty, Technical Specifications, Storage, Disposal

Limited Warranty

ResMed warrants that your ResMed mask system, including its components: mask frame, cushion, headgear, tubing and other accessories (“Product”) shall be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase by the initial consumer.

For further details refer to the Warranty.

Technical Specifications

Note: The mask system does not contain latex, PVC or DEHP materials.

Pressure–FlowThe mask contains passive venting to protect

Curveagainst rebreathing. As a result of manufacturing variations, the vent flow rate may vary.

	50								Pressure	Flow
	45
									(cm H2O)	(L/min)
(L/min)	40
	35								4	19
	30
Rate									8	28
	25
Flow	20								12	34
	15
Vent	10								16	40
	5
	0								20	45
	4	6	8	10	12	14	16	18	20
			Mask Pressure (cm H2O)

Dead Space	The dead space of the mask varies according to cushion size. It is
Information	128 mL for the Extra Large size.
Therapy Pressure	4 to 20 cm H2O
Resistance	Drop in pressure measured (nominal)
	at 50 L/min: 0.1 cm H2O
	at 100 L/min: 0.7 cm H2O

Environmental Operating temperature: +41°F to 104°F (+5°C to +40°C)

Conditions Operating humidity: up to 95% non-condensing

Storage and transport temperature: -4°F to 140°F (-20°C to +60°C)

Storage and transport humidity: up to 95% non-condensing

Gross	S:	140 mm (H) x 91 mm (W) x 93 mm (D)
dimensions	M, L, LW, XL: 155 mm (H) x 91 mm (W) x 98 mm (D)
	Mask fully assembled – no headgear.

Note: The manufacturer reserves the right to change these specifications without notice.

Storage

Ensure that the mask is thoroughly clean and dry before storing it for any length of time. Store the mask in a cool dry place out of direct sunlight.

Disposal

The Mirage Micro does not contain any hazardous substances and may be disposed of with your normal household refuse.

8