Mirage OMNISAT V2(9
notes
owners manual
11 |
| 12 |
5.Mount the wall bracket into position. The use of proper anchors for all screws is required to ensure a secure installation. Please note that screws and anchors are not included in the OMNISAT V2 CC package. (Diagram 10)
6.Feed the wires through the hole cut out. (Diagram 11)
7.Connect the wires to the appropriate binding posts at the back of the OMNISAT V2 CC.
IMPORTANT: Connect the speaker wire from the positive (RED +) terminal on the amplifier to the positive (RED+) terminal on the speaker. Connect the negative
8.After the wires are connected, hang the OMNISAT V2 CC on the wall bracket. Center the OMNISAT V2 CC and push down lightly on the speaker to achieve a tight fit between the speaker and the bracket. If the speaker is not centered, repeat this step. (Diagram 12)
BOOKSHELF/ENTERTAINMENT
UNIT PLACEMENT
The small size and Omnipolar dispersion of the versatile OMNISAT V2 Satellite and OMNISAT V2CC center channel speakers permits them to be easily placed, among other places, in a bookshelf. To maximize the Omnipolar dispersion potential, bring the speaker as close to the front of the cabinet as possible.
SPECIFICATIONS:
OMNISAT V2 (Satellite)
System Type: | |
Frequency Response: | 70 |
|
|
Tweeter: | 1" (25mm) PTH™ Pure Titanium Hybrid |
|
|
Woofer: | 4.5" Polypropylene Titanium Deposit Hybrid woofer |
|
|
Power Handling: | 150 watts |
|
|
Crossover Point: | 2.7 kHz |
|
|
Room Efficiency: | 89 dB |
|
|
Impedance: | |
|
|
Recommended | 10 to |
|
|
Inputs: | High Quality |
|
|
Dimensions (H x W x D in) | 8.12 x 5.53 x 5.9 |
|
|
Dimensions (H x W x D cm) | 20.62 x 14.05 x 14.99 |
OMNISAT V2 CC Table Top Mount
13 |
| 14 |
CONNECTIONS
The Mirage OMNISAT V2 series is equipped with high quality binding posts that permit the use of banana plugs, spades, or a bare wire connection. Connect the speaker wire from the positive (RED +) terminal on the amp to the positive (RED+) terminal on the speaker. Connect the negative
Mirage, SCT™, and Create Your Sound™, are trademarks of Audio Products International Corp. "Dolby", "Dolby
OMNISAT V2 FS (Floorstanding model)
System Type: | 2 1/2 way Magnetically Shielded OMNIPOLAR Tower with |
| hybrid bass loading |
|
|
Frequency Response: | |
|
|
Tweeter: | 1" PTH |
|
|
Woofer: | (1) 4.5" Poly Titanium deposit hybrid in sealed |
| |
| (4) 4.5" Poly titanium hybrid passive radiators |
Power Handling: | 175 watts |
|
|
Crossover Point: | 900Hz, 2.5kHz |
|
|
Room Efficiency: | 94dB |
|
|
Impedance: | |
|
|
Inputs: | High Quality |
|
|
Dimensions (H x W x D in) | 45 x 5.53 x 5.9 (height includes glass base) |
|
|
Dimensions (H x W x D cm) | 114.3 x 14.05 x 14.99 |
OMNISAT V2 CC (Center Channel)
System Type: | |
Frequency Response: |
|
|
|
Tweeter: | 3/4" PTH |
|
|
Woofer: | 3" Poly titanium deposit hybrid midrange, 2 x 4.5" |
| Poly titanium hybrid woofers with neodymium motors |
|
|
Power Handling: | 175 watts |
|
|
Crossover Point: | 700Hz, 2.7kHz |
|
|
Room Efficiency: | 91dB |
|
|
Impedance: | |
|
|
Dimensions (H x W x D in) | 5.21 x 17.8 x 4.62 |
|
|
Dimensions (H x W x D cm) | 13.23 x 45.21 x 11.73 |
22
3