SPECIFICATIONS
HT-MSU
Power Requirements: 12VDC 1.25A Regulated
Unit Dimensions: 10.52”L x 5.85”W x 1.01H (26.72 cm x 14.86 cm x 2.57 cm)
RF Section:
Signal Range: 75 to 100 feet open air (22.86 to 30.48 meters)
Wiring Requirements: RG59 CL Antenna Cable (included),
Trigger Output Voltage: Three assignable outputs at 12VDC 150mA
Contact Closures: Three assignable Normally Open/Normally Closed contact closures rated to handle 12V @ 5 Amps each
IR Ports: 8 Routed IR Flasher Ports and 1 Routable Global IR Output Port
RS232 Ports: 8 Routed RS232 Output Ports
IR & RS232 Code Memory: 4000 commands depending on brand type and model of source
Sequence capability: 450
Sequence Delays: .1 to 20.0 seconds per step
Component Synchs: 8 Power Status Synch ports rated to sense 12V 150mA input signals or video voltage
IR Bandwidth: Compatible with virtually all brands of remotes using carrier frequencies between 26 and 105KHz
IC2 REMOTE
Power Requirements: 12VDC 1.25A Regulated
Battery: Rechargeable
Full Charging Cycles to 80% battery effectiveness: 550
Unit Dimensions: 7.45”L x 5.22”W x 2.96”H (18.92 cm x 13.26 cm x 7.51 cm)
RF Section:
Signal Range: 75 to 100 ft open air (22.86 to 30.48 meters)
GENERAL
iC2 System Shipping Weight: Approximately 7 lbs. (3.18 kg)
Warranty:
Agency Certifications: Tested to UL/EN60065 for US, Canadian and EU markets.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC and CE approved.
NILES AUDIO CORPORATION – |
| 27 |
|
