Niles Audio iC2 manual Assignable 12 Volt Outputs, Assignable Relays

ASSIGNABLE 12 VOLT OUTPUTS

These three ports are completely assignable and can be used to trigger out-board automation devices such as:

•12V Triggered AC Power strips like the Niles AC-3

•12V Triggered subwoofers like the Niles SW300, SW12, SW10, and Pro15SW

•12V Triggered Dipole/Bipole rear effects speakers like the StageFront IW650FX

•Motorized drapery systems and projection screens

12V Output #1 has a default setting to output 12V DC whenever the home theater receiver is turned on by the HT-MSU Master Key activity setting.

12V Output #2 has a default setting to output 12V DC whenever the HT-MSU Master Key activity setting turns on the TV.

12V Output #3 has no default and is completely assignable.

The three assignable 12V outputs can be configured (programmed) using the Niles QuickConfig Software.

ASSIGNABLE RELAYS

There are three independently assignable dry contact closures/relays. These connections can be used to trigger lights, curtains, screen lifts, and other devices. Use the Normally Open or Normally Closed side of the contact closure to complete the circuit to control the device.

10