CONTENTS
Check that your iC2 Home Theater Automation and Control System contains the following:
• Home Theater Main System Unit | • iC2 Remote + Battery |
• | • iC2 Remote Charging Power Supply |
• RF Antenna | • Master Key Label Sheet |
• Antenna Wall Bracket | • 10 iC2 Remote Master Key Caps |
• 10' (3 meters) Antenna Extension Cable | • System Configuration Worksheet |
• End User Guide | • Ferrite Bead |
PARTS GUIDE |
|
|
|
|
|
|
THE IC2 REMOTE | 4 | 5 |
|
|
|
|
|
|
|
|
|
| |
1 |
|
|
|
|
| 3 |
|
|
|
|
|
| |
| � | � | � |
|
|
|
|
| ���� |
|
| ������ |
|
| � | � |
| � |
|
|
| � | � |
| � |
|
|
|
|
|
| � | ����� | � |
|
|
|
| ��� | �� | |
| � | � |
| � |
|
|
|
|
|
| ��� | ���� | �� |
| ��� | � | ����� | � |
| � |
|
|
|
|
| ���� |
|
2 |
|
|
| ���� |
| ���� |
| ���������� |
|
|
|
|
|
| Figure 1. iC2 Remote Front View |
1)Master Keys - The eight Master Keys on the left side of the remote can be custom labeled and will initiate the iC2’s automation functions when programmed via Niles QuickConfig. Pressing a Master Key will prompt the
2)System Off Button - When pressed, the Remote will instruct the
3)Function Keys - These 36 Function Keys include the numeric, transport menu navigation mute, volume and channel keys, and can be programmed to control the labeled Master Keys’ source functions. The Function Keys can be programmed differently for each Master Key and provide different functionality or sequences.
4)Backlight Button - This button is used to turn on the backlight for use in low light conditions. The backlight will turn off after a short duration (about 10 seconds) and can be programmed for activation.
5)Charging Indicator - The LED is blue when the charging power supply is plugged in and the battery is charging normally. The LED is red if there is a problem with charging the battery.
4