Niles Audio iC2 manual Niles Audio Corporation 1-800-BUY-HIFI

5) IR Input - A 4-position removable quick connect plug for connecting an IR sensor to the HT-MSU. This connection allows IR control of the HT-MSU and/or IR pass-through for connected sources.

6) Global IR Output - A 3.5mm jack provides all IR codes that the HT-MSU generates and all IR codes that come in through the IR Input connection and can be configured via Niles QuickConfig for Normal or High output. Normal output is designed for a Niles MF1 IR MicroFlasher®; high output is designed for a Niles IRB1 High-Output IR Flasher.

7) RF Antenna Socket - The BNC connector accommodates the supplied antenna. The antenna must be installed perpendicular to the ground for best results. A 10 foot (3 meter) antenna extension cable and mounting bracket are included if remote installation of the antenna is necessary.

8) Status 12V or Video - Six video and voltage-sensing RCA sync inputs for sources 1 through 6 detect when a source is on/off for reliable system activation.

9) Status 12V - Two voltage-sensing 3.5mm jacks for sources TV/7 and RCV/8 detect when those sources are on/off for reliable system activation.

10) Power 12V DC - A barrel connection for the provided 12V DC power supply.

11) Diagnostic - A USB A connection for Niles Service Center.

12) PC Connection/Expansion - A RJ45 connection used to plug in a laptop computer for system configuration programming or expanding the system design out to future Niles multizone receivers. Niles QuickConfig is used for system configuration.

13) RF Test - A 3.5mm jack used to connect the optional Niles IR/RF tester for testing RF reception.

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373 7