3)If your system design involves a RFG and sharing sources with a future Niles multizone receiver (see System Configuration #3 in the System Design Considerations section), the programming connection must be made on a future Niles multizone receivers’ Communication and Control connection ports. Configuration of the entire system can be accomplished with one connection and the Niles QuickConfig Configuration wizard-based software “through” future Niles multizone receivers.

A Worksheet is provided with the iC2 System and should be used to organize all of the information an installer will need to configure the iC2 System. The iC2 System worksheet is also available on the Niles website: www.nilesaudio.com

Figure 11. PC connection for programming

HT-MSU

LAPTOP

 

CAT-5 CABLE

Figure 12. PC connection for programming when using optional RFG.

HT-MSU

LAPTOP

Keypad Port

CAT-5 CABLE

System Port

RFG

NILES AUDIO CORPORATION – 1-800-BUY-HIFI305-238-4373

17

Page 19
Image 19
Niles Audio iC2 manual PC connection for programming