ResMed NOT014224-2 3.4 Example of fully-assembled system, 3.5 Connecting accessories

1 35

3.4 Example of fully-assembled system

Figure 16: Example of fully-assembled system (single circuit with

expiratory valve and pressure line).

If your system does not have any accessories (external battery,

supplemental oxygen), you can now switch your device on, see

“Switching on and shutting down” on page19.

3.5 Connecting accessories

Any accessories must be attached before the device is switched on.

To connect the external battery:

1. Connect the black plug to the battery holder .

2. Connect the other end to the socket on the rear of the device .

Figure 17: Connection of the external battery to the device.

26V 3A

Contents

Main VS Ultra & VS Integra D C O B A SETTING UP THE DEVICE E F (2 seconds) G H Page Page Contents 1 Introduction 1.1 Definitions WARNING 1.2 User/Owner Responsibility 1.3 Medical Information Warnings 2 Description of the device 2.1 Components 2.2 Your device Front view Page Rear view Side view O 2.3 Circuit 2.4 Accessories External battery (optional) Coupling for supplemental oxygen flow (optional) 2.5 Device control panel The device control panel comprises an LCD screen and a keypad. 3 Connection procedures 3.1 Connecting to a power supply 3.2 Connecting the circuit Option 1 Single circuit Option 2 Single circuit with expiratory valve and pressure line P Option 3 Double circuit 3.3 Connecting the mask 3.4 Example of fully-assembled system 3.5 Connecting accessories Connection of external battery (optional) Page Connecting supplemental oxygen (optional) 4 Switching on and shutting down 4.1 Standby 4.2 Starting up 4.3 Shutting down Page 5 Cleaning and Maintenance WARNING 6 Troubleshooting P P 7 Technical Specifications 7.1 Dimensions 7.2 Weight 3 kg 3.5 kg 7.3 Power supply 7.4 Transport 8 Appendix Travelling with your ventilator Page Index