ResMed NOT014224-2 P P

Low pressure

alarm (LP)

This alarm also indicates

a wrongly connected or

disconnected circuit.

Reconnect the circuit.

High pressure

alarm (HP)

A component in your

circuit is blocked.

Clean, empty or replace

the components of your

circuit. Contact your

HME if this alarm is

activated too often.

Alarm Cause Solution

Contents

Main VS Ultra & VS Integra D C O B A SETTING UP THE DEVICE E F (2 seconds) G H Page Page Contents 1 Introduction 1.1 Definitions WARNING 1.2 User/Owner Responsibility 1.3 Medical Information Warnings 2 Description of the device 2.1 Components 2.2 Your device Front view Page Rear view Side view O 2.3 Circuit 2.4 Accessories External battery (optional) Coupling for supplemental oxygen flow (optional) 2.5 Device control panel The device control panel comprises an LCD screen and a keypad. 3 Connection procedures 3.1 Connecting to a power supply 3.2 Connecting the circuit Option 1 Single circuit Option 2 Single circuit with expiratory valve and pressure line P Option 3 Double circuit 3.3 Connecting the mask 3.4 Example of fully-assembled system 3.5 Connecting accessories Connection of external battery (optional) Page Connecting supplemental oxygen (optional) 4 Switching on and shutting down 4.1 Standby 4.2 Starting up 4.3 Shutting down Page 5 Cleaning and Maintenance WARNING 6 Troubleshooting P P 7 Technical Specifications 7.1 Dimensions 7.2 Weight 3 kg 3.5 kg 7.3 Power supply 7.4 Transport 8 Appendix Travelling with your ventilator Page Index