ResMed S7 user manual Are not likely to cause any

GUIDANCE AND MANUFACTURER’S DECLARATION - ELECTROMAGNETIC EMISSIONS AND IMMUNITY

Guidance and manufacturer’s declaration – electromagnetic emissions

The ResMed S7 Lightweight is intended for use in the electromagnetic environment specified below. The customer or the user of the ResMed S7 Lightweight should assure that it is used in such an environment.

Emissions test	Compliance	Electromagnetic environment -
		guidance
RF emissions CISPR11	Group 1	The ResMed S7 Lightweight uses RF
		energy only for its internal function.
		Therefore, its RF emissions are very low
		and are not likely to cause any
		interference in nearby electronic
		equipment.
RF emissions CISPR 11	Class B	The ResMed S7 Lightweight is suitable
		for use in all establishments, including
Harmonic Emissions	Class A	domestic establishments and those
IEC 61000-3-2		directly connected to the public low-
		voltage network that supplies buildings
Voltage Fluctuations/Flicker	Complies	used for domestic purposes.
Emissions IEC 61000-3-3

Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into service according to EMC information provided in this document.

Warnings: The ResMed S7 Lightweight should not be used adjacent to or stacked with other equipment. If adjacent or stacked use is necessary, the ResMed S7 Lightweight should be observed to verify normal operation in the configuration in which it will be used.

The use of accessories (eg Humidifiers) other than those specified in this manual is not recommended. They may result in increased emissions or decreased immunity of the ResMed S7 Lightweight.

ENGLISH

SYSTEM SPECIFICATIONS 25