Messages on the S8 Series II LCD

Your clinician may have set your S8 Series II device to remind you about important events, such as when to replace your mask, when to insert your Data Card (if your device is Data Card enabled) and so on.

The reminder message is displayed on the LCD and is visible if the device is not delivering therapy. The backlight on the LCD flashes when a message is displayed. Your clinician can set any of the following reminders on your LCD:

Message

Description

Action

 

 

 

INSERT

May appear if your device is

CARD

Data Card enabled.

Insert your Data Card and follow any instructions that your clinician has given you. When you have done this, the message will

disappear from the LCD. Pressing (Ok) will also remove the message.

REPLACE

May appear when your mask

MASK

is due for replacement.

Press (Ok) to remove the message from your LCD, and replace your mask with a new one.

CALL

May appear as a reminder to

PROVIDER

contact your clinician, eg, to

 

discuss how your therapy is

 

going.

Press (Ok) to remove the message from your LCD, and contact your clinician.

REPLACE

May appear as a reminder to

FILTER

replace the air filter on your

 

device.

Press (Ok) to remove the message from your LCD, and replace the air filter.

SERVICE

May appear as a reminder to

DUE

return your device for service.

Press (Ok) to remove the message from your LCD, and contact your clinician.

Using the Data Card to Collect Data

If your clinician needs to review your treatment, they will ask you to use the Data Card to copy data from your S8 Series II, and to return the card to them.

Copying Data onto the Data Card

1Switch on the S8 Series II and wait until you see the standby (Ramp or Settling) screen.

2Hold the Data Card with the arrow facing up and insert it into the Data Card slot until it stops. Data copying starts automatically.

The “Card Inserted Please Wait” message is displayed on the S8 Series II LCD while data is being copied. Copying takes approximately five seconds.

The “Copy Complete Remove Card” message is displayed on the LCD when copying has finished.

8

Page 10
Image 10
ResMed manual Messages on the S8 Series II LCD, Using the Data Card to Collect Data, Copying Data onto the Data Card

S8 AutoScore II, S8 Series II specifications

The ResMed S8 Series II is a prominent line of CPAP (Continuous Positive Airway Pressure) devices designed to treat obstructive sleep apnea effectively. One of the standout models within this series is the S8 AutoScore II, which has been engineered to adapt to varying patient needs with precision and comfort.

A key feature of the S8 AutoScore II is its AutoSet technology, which continuously monitors a patient's breathing patterns throughout the night. This innovation allows the device to automatically adjust the pressure delivered based on real-time data. As a result, users benefit from personalized therapy, ensuring that they receive the optimal level of air pressure needed at any given moment while they sleep.

The S8 AutoScore II also boasts an intelligent ResMed algorithm, which enhances its ability to differentiate between obstructive and central apneas. This specificity not only improves treatment efficacy but also contributes to increased patient comfort, minimizing the chances of unnecessary pressure increases that could lead to discomfort or disturbances during sleep.

Another notable aspect of the S8 AutoScore II is its user-friendly interface. The device features an intuitive LCD screen that displays essential information and settings, making it straightforward for users to navigate through various options. This simplicity is particularly beneficial for new users who may find CPAP therapy overwhelming.

In addition to its advanced technological features, the S8 Series II incorporates a compact and lightweight design, making it highly portable. Users can easily transport the device for travel or overnight stays, promoting compliance with their therapy even when away from home.

Moreover, the S8 AutoScore II comes equipped with a SmartStart function, which allows the device to automatically commence therapy once the user breathes into the mask. This feature enhances user convenience, eliminating the need for manual adjustments once the device is in place.

The S8 Series II also emphasizes quiet operation, ensuring that the device does not disturb the user or their partner during the night. Low noise levels and a comfortable fit contribute to an overall positive sleeping experience, which is crucial for the success of CPAP therapy.

Overall, the ResMed S8 Series II, particularly the S8 AutoScore II model, represents a blend of cutting-edge technology, user-centric design, and versatile functionality. These characteristics make it a reliable choice for individuals seeking effective management of obstructive sleep apnea while prioritizing comfort and convenience in their treatment journey.