Turn off any associated components prior to connecting the Opus 21.
This minimizes the chance of momentary electrical surges disturbing your system.
Connect the OpusLink interconnect to both the cd player and Power Centre.
Note that the cable can only be installed in one direction. Secure the connectors by
integral screws.
Connect the Opus PowerLink cable to both the s30 and Power Centre.
Note that the cable can only be installed in one direction.
Connect your speaker cables to the s30 using either spade lugs or banana jacks.
The optional binding posts work best with spade lugs. Ensure proper polarity, which is indicated on the top of the connector. If your speaker is fitted with a separate ground connection, it may be attached to the center (yellow) banana jack, which is returned to the amplifier
With the power switch in the OFF position, attach the power cord and connect it to your outlet.
The OFF position is selected when the O symbol on the switch is depressed.
Turn on the main power switch.
The ON position is selected when the symbol on the switch is depressed. The Opus 21 will take a few seconds to initialize and read the disc if present. The s30 selects the cd as the default input.
Turn on the rest of your system.
It is a good habit to turn the amplifier on last, and off first, to prevent surges and transients from reaching your loudspeakers.
Insert a disc and press PLAY, or select another input.
The s30 amplifier will automatically select the cd input when a disc is played. Analog inputs may be selected from the remote control or directly from the front panel. The digital input of the cd player is accessed only from the remote control.
The Opus 21 is designed to remain powered continuously. In standby mode, the display is turned off and the output is muted, but all of the circuitry remains powered.
power switch in the rear. When power is